Gtco 2500 Series - Users Guide 2/3 Manual de usuario descargar pdf (Pagina 22)

2500 Series 22

5. Reinstall the selector card. The printed side of the card must face the power cord

connector and the indicator pin must point out.

Changing the Fusing

Tablets operating at 100-125V require one slow blow fuse rated at .25 A.

Tablets operating at 200-250V require two slow blow fuses rated at .125 A.

To change the fusing:

1. Loosen the Phillips screw on the fuse block one turn.

2. Remove the fuse block by lifting it free on of the screw, sliding it away from the

screw and then lifting up.

Invert the fuse block and reinstall it onto the pedestal. Insert the proper fuses into the

holders. (Two fuses are required, although a dummy fuse may be used in the neutral lower

holder.)

1 2 ... 17 18 19 20 21 22 23 24 25 26 27

Sin comentarios

Gtco 2500 Series - Users Guide 2/3 Manual de usuario Pagina 22