Gtco MM II 1201 - Users Guide Manual de usuario descargar pdf (Pagina 15)

MM II 15

 Sx and Sy are the X and Y coordinate signs. 1 is positive and 0 is negative. In

absolute coordinates, the sign is always positive. In relative coordinates, the sign

can be positive or negative.

 T is the Tablet Identifier. Your choice of 1 or 0. Command controlled.

 PR is the proximity bit. 0 is in-prox and 1 is out-of-prox.

 PH is the phasing bit, which is always 1.

 X0, X1, etc. and Y0, Y1, etc. are the X and Y coordinate bits.

ASCII BCD Report Format

The ASCII BCD format depends on the coordinate system and resolution:

Resolution

Absolute Coordinates

Relative Coordinates

1 to 508 lpi (20 lpmm)

1000 lpi or 40 lpmm

XXXX, YYYY, F<CR><LF>

XXXXX, YYYYY, F<CR><LF>

S0XXX, S0YYY, F<CR><LF>

S00XXX, S00YYY, F<CR><LF>

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 60 61

Sin comentarios

Gtco MM II 1201 - Users Guide Manual de usuario Pagina 15